Metal Pipe Bending Machine

1. Manual and automatic pattern can be chose freely, controlled by NC, process steps showed in Chinese and English on the screen, operated by man-machine conversation mode.

2. It has functions of automatically counter and takes out core; it is also with anti-crease device.

3. Many angles can be set and controlled by many groups of procedure.

4. The cooling system ensures the temperature of oil is constant and the pressure is smooth.

1. Make sure that the machine has been grounded well before it's connected to the AC power line.

2. Anybody and anything can't enter into the field of the machine when it working.

3. Operator must stand in the field where he (or she) can turn off the emergent button.

4. The machine must be operated by a specific person.

5. Please cut off the power when the machine breaks down.

6. Keep the machine and its environment clean.

7. When machine in Automatic-Mode, make sure the setting data correct.

8. Please turn off the power for safety when installing the mould.

9. Before starting the machine, please check the height of oil mark, it should be at 2/3 location of full range.

10. Fasten the machine on the firm ground flatly to make the machine steadier.

11 Check rotating direction of motor, if the direction is reverse, adjust AC power wiring.

Hot Tags: metal pipe bending machine, China metal pipe bending machine manufacturers, suppliers, factory, Full Automatic Pipe Bending Machine 3A1S, CNC Servo Pipe Bending Machine, Forming Machine, Pipe Cutting Machine, Stainless Steel Pipe Bending Machine, Full Automatic Pipe Cutting Machine