Pipe bending machine is a new type of pipe bending tool with bending and lifting functions. It has many advantages such as reasonable structure, safe operation, convenient operation, reasonable price, fast loading and unloading, easy portability, and multiple uses for one machine. In addition to having the function of bending pipes, it can also remove bent pipe components and be used as a separate hydraulic lifting machine. Hydraulic pipe bending machines account for a large proportion of the domestic market, mainly used for repairing pipelines in factories, warehouses, docks, buildings, railways, cars and other equipment.
Eight methods for maintaining a pipe bending machine:
1: It is necessary to strictly follow the operating regulations when operating the pipe bending machine (key points).
2: It is necessary to keep the pipe bending machine clean, and apply rust proof grease to the unpainted parts.
3: Before starting the pipe bending machine, add smooth oil in a timely, fixed and quantitative manner according to the requirements of the smooth chart. The oil should be clean and free of sediment.
4: Regularly inspect and repair the switch, ensure its stability, handle, and ensure its reliable operation.
5: The smooth oil inside the motor bearings should be replaced and filled regularly, and the operation of the motor part should be checked regularly to ensure it is normal.
6: Regularly check if the V-belt, handle, knob, and buttons are damaged, and replace severely worn ones in a timely manner.
7: Non designated personnel are prohibited from operating equipment, and it is usually necessary to ensure that people leave the machine and stop.
8: Oil and clean the pipe bending machine 10 minutes before leaving work every day.
So when using the purchased pipe bending machine, pay attention to the following conditions:
1. Before operation, please check whether the smooth points of the machine are lacking oil, whether the safety protection devices are secure, and whether the movement organization is loose. Wait for one person to acknowledge before opening the operation.
2. Start the pipe bending machine oil pump and check if the system pressure is maintained within the regular range. If it is too high, it will damage the hydraulic components and waste the power supply. If it is too low, it will affect the operation.
3. Adjust the required orientation and viewpoint of the parts, and position the parts to the required length.
4. Adjust the vertical lifting guide rail so that the clamping cylinder of the guide mold can move and clamp the iron pipe tightly.
5. Enable the clamping cylinder of the clamping mold to clamp the iron pipe.
6. Normal operation: Place the workpiece into the bending die, with the front end in contact and positioning, and press the foot switch to complete it.
7. After completing the homework, cut off the power supply and do a good job of cleaning and smoothing.
8. In case of emergency when operating the pipe bending machine, press the emergency stop button, then turn the rotary switch to the manual position and reset it manually. If a malfunction occurs, please report it for repair in a timely manner.
Apr 10, 2024
Leave a message
Eight Usage Specifications And Maintenance Methods For Pipe Bending Machines
Send Inquiry




