Hydraulic Pipe Cutter

YJ-275Q, YJ-275Y is equipped with the automatic feeder and automatic clamping device, which moves smoothly, lightly and efficiently.

Easy to straight-across-cut and angular cut, with a precise angle. The cooling system causes the machine to run for a long time, which prolongs the life of the saw bit. The pressure for the hydraulic system and the clamping pressure are respectively shown by its settings which ensure the thin wall of the pipe will not deform even under the pressure.Yj-315Q is equipped with the pneumatic automatic feeding and clamping device, which works smoothly

lightly and efficiently.YJ-350 adopts vertical slide feeding and hydraulic driving, which moves smoothly and lightly.P.S.: Safety cap can be ordered

1. The operator must read this volume carefully before using the machine.

2. The operators should be trained to keep safe. Persons not trained don't use the machine.

3. The machine should be connected with the ground before setting up an electric circular. In order to use the machine safely, it is not allowed to use if it has not been connected with the ground.

4. This machine is equipped with a quick-stop button meeting with the emergency, which may stop the machine when necessary.

5. We should make sure the safety cover of the saw piece to see whether it is assembled effectively before staring the machine.

6. The electricity supply must be cut off when you assemble or replace the saw piece.

7. When assemble' s the saw piece, we should carefully select the right saw piece whose teeth match the pipe side (referring to the Eleventh Parameter Bilingual List) , and make sure the direction of the saw teeth should be in agreement on the direction of the circling arrow on the safely cover. The saw piece should be lifted by hand, then twist the screw tightly so as to obviate the assembly gap.

8. The circling direction of the saw piece must be in agreement on the direction of arrow on the safety cover before starting the machine.

9. The clamping apparatus of the work piece must be squeezed tightly and firmly, otherwise the saw is easily damaged.

10. The dull saw is not allowed to use so as to avoid causing damages.

11. The machine should be settled down on the solid ground the horizon to horizoually the machine work steadily.

12. Check the height of the liquid level before using, to keep the oil level higher than half of the oil mark.

13. Keep the machine and its surroundings clean.

Hot Tags: hydraulic pipe cutter, China hydraulic pipe cutter manufacturers, suppliers, factory, Hydraulic Pipe Cutting Machine, Pneumatic Pipe Cutting Machine, Metal Pipe Cutting Machine, Pipe Cutting Machine, Pneumatic Pipe Cutter