What factors will affect the bending accuracy of a fully automatic pipe bending machine

How many types of pipe bending machines are there? Why do some only cost a few thousand while you need tens or even hundreds of thousands? What is the difference? In fact, there are only three types of automatic pipe bending machines and CNC pipe bending machines. Automatic pipe bending machines are pure electric, driven by an electric motor and driven by a gear chain; The hydraulic pipe bending machine decomposes the bending action and uses hydraulic pressure to drive actions such as clamping and unclamping, bending and retracting, auxiliary feeding and retracting, and core feeding and retracting.
1. The thickness and roughness of the material
Laser cutting is suitable for cutting thin plates, with effective thicknesses of carbon steel below 12mm and stainless steel below 6mm. The processed quality is significantly enhanced, and efficiency is also guaranteed. If cutting<1mm material, the incision will also be relatively smooth. The surface roughness of materials also determines the quality of cutting. Generally, the smoother the material, the better the quality of the cut.
2. Working power and mode of CNC pipe bending machine
After research, it has been proven that the higher the power, the better the effect even when cutting the same sheet metal. The laser cutting mode and material have a certain degree of compatibility, and the higher the effect, the better.
3. Focus position
The focus of the laser cutting machine can be aligned, and the cutting accuracy and precision can meet the desired requirements.
4. Cutting speed
In fact, no matter what type of material it is, if it can make the cutting speed match the material, then the cutting effect is better at this time. If it is too fast or too slow, it will have an impact on laser cutting.
5. Auxiliary gas pressure and type
The higher the pressure of the auxiliary gas, the higher the purity of the gas, the fewer impurities adhered to the material, and the smoother the cutting edge. Generally speaking, the speed of oxygen cutting is faster, the cutting effect of nitrogen is better, and the cost is also lower. The cutting effect may vary depending on the type of gas used.